Operating instructions

draft

DV-IP HD

Camera

This menu allows the conguration of active local camera channels. This page will only display the

cameras connected to the DVR via the BNC connectors on the rear of the machine, cameras in non-

local systems cannot be edited on this page.

Title Each of the camera titles can be edited for ease of use i.e. the

camera type, location or view description could be used.

Note: If a camera title is entered via the local monitor, an on-screen virtual keyboard will be

displayed to aid text entry.

Mode The settings will default to ‘Colour’. If Monochrome cameras

are used, select ‘Mono’. Selecting ‘Mono’ will remove colour

patterning. If a particular channel is not in use or the camera has

failed, select ‘Not Connected’.

Term The unit will automatically terminate the camera input with 75Ω.

This should be disabled if the video feed is looped through to

another device.

Fail Rep Select this option to activate a Failure report in the event of

camera connection failure.

Note: The arrow button displayed next to each textbox allows settings to be replicated for those

cameras listed below. This will only affect the adjacent option i.e. Mode arrow will replicate

the Mode setting to cameras below the clicked arrow.