Operating instructions

draft

DV-IP HD

System Cong

The unit can be congured with up to 20 systems. A system is a collection of DVRs and cameras

selected from that DVR. Systems are not formally connected networks but a collection of DVRs

viewable over an IP network. Each system provides access and control of up to 99 cameras at any

one time.

Each individual system can be selected from a drop down menu which displays the server list, DVRs

and IP cameras.

Camera numbering is sequential within that system (up to the maximum 99 cameras per system).

Note: Forlocalcamerafeedstofunctioncorrectly,ensuretherstserveroptionfor

System1isconguredtodisplaythelocalcamerasasshownbelow:

Server URL Server Name Camera Selection

localhost local 1-4, 1-8 or 1-16

System Select from 20 available systems using the drop down menu.

System Name If required, enter a recognisable name for the system e.g. ‘North

Car Park cameras’ (this name is held on the DV-IP HD and

represents the system).

Server URL Enter the IP addresses of the servers providing the video signals.

Server Name

Enter a name for the accompanying requested server (this name

is held on the unit and represents this server).

Camera Selection Select the cameras to be accessed. To select individual cameras,

use the format 1,3,5 or 1:3:5 etc. To select a range of cameras,

use the format 1-3 or 1_3 etc. All connected, non-covert cameras

within the range will be added in numerical connection order.