Operating instructions

draft

DV-IP HD

Relevant menus can also be accessed directly from other menu screens via the coloured softkey

options shown at the base of each menu. The options available will depend on the menu being

viewed. Select a softkey option by pressing either the corresponding button on the IR Remote

Control (if viewing the menus locally), or by selecting the relevant option via the PC mouse (if

viewing the web pages).

Note:

Any changes made via the web pages are automatically saved when the page is closed. To

‘manually’ save changes, select the Save option.

Using the IR Remote Control

Press the MENU button to access conguration menus via a connected local monitor. The menu will

have a red indicator highlighting the rst option. Select a main menu heading to open a drop down

list of further sub-options. Press the Down Directional button to highlight the next menu option, press

OK to open the highlighted menu.

Press the Right Directional button to highlight the rst editable parameter on the screen.

Use the Left/Right/Up/Down Directional buttons to move between elds.

Select OK to start editing a eld (the option will be outlined in green).

Use the Up/Down Directional buttons to change the settings within an editable eld.

Numeric elds can be edited with the Directional buttons. Use the Up/Down Directional buttons to

increase/decrease by an increment of 1, use the Left/Right Directional buttons to increase/decrease

by an increment of 10.

Use the OK button to accept a new setting. Use the coloured softkeys to select the accompanying

colour option on screen i.e. red key to select the red option. To undo changes made to any menu,

select the Refresh (Purple) option.

Virtual Keyboard

If numeric or text data requires entry, an on-screen virtual keyboard will be displayed. Use the

Directional buttons to move between characters. Use the OK button to select a character. To enter

details and exit the Virtual Keyboard, select the OK option. Select Submit to enter details and return

to the Virtual Keyboard. Press Cancel to exit the Virtual Keyboard without entering any text.

Using a USB Mouse or the Web pages

Navigate the menus by clicking the tabs displayed on the left of the menu headings (on the menu

tree). The rst option is highlighted with a red tab. Select a main menu heading to open a drop down

list of further sub-options.

Highlight an editable eld by clicking on it directly. Use the drop down menus to change settings or

enter text/numeric data directly using a PC keyboard.

Note: A selected item in the drop down list will appear highlighted.

Navigating away from a page (clicking on a different option on the menu tree) will automatically save

any changed settings. To undo changes made to any menu, select the Refresh (Purple) option.