Operating instructions

draft

DV-IP HD

Step 10 Connecting Power

The DV-IP HD has an internal power supply unit. Connect the mains lead to the unit and then to

the wall socket, or to a fused spur connection. Check local regulations before installation. Some

countries require an Alarm/Security device be connected to a fused spur and not a wall outlet

socket. RF

Advanced Installation

Connecting Storage devices

Images are recorded to the internal hard disk for instant playback and searching by the operator.

The capacity of the internal disk effects the amount of images and time period that can be recorded.

The internal hard disk is a temporary storage device as images are overwritten after a set period.

If images need to be held for a longer time period, external storage is required. The SATA ports on

the rear of the unit are used to connect to external storage devices. The unit can support multiple

external hard disks. To maintain an effective SATA link, the length of all cabling from the unit to the

connected device should not exceed two metres.

The unit’s operating system will continue to utilise the internal hard disks if the external hard drive

encounters a problem.

Dedicated Micros Managed Storage Expansion units

A DM Managed Storage Expansion unit is connected via the SATA port. A Managed Storage unit

provides high capacity, environmentally managed storage in a single box. Disk temperature is

maintained at a constant level and the disk management system ensures only disks in operation are

spun. Both of these features help extend drive life.

For further information regarding the DM Managed Storage Expansion unit, please contact

Dedicated Micros technical support team.