Operating instructions
draft
Dedicated Micros ©2008
18
DV-IP HD
Step 9 Connecting Telemetry Cameras
Simple Dome Connection
Pin connections for RS485 connection to a dome on serial port 3/4 are:
Dome Cable DV-IP HD Serial Connector
Yellow 1 TX+
Green 9 TX-
If the dome is being connected using an RS485 connection, the dome address should be set to
match the camera input number on the DV-IP HD i.e. if the dome is connected to video input 3,
the camera address should be ‘03’.
Dennard 2040 & 2060 Domes
A Dennard 2040/2060 Dome can be connected via either co-axial telemetry or RS485 twisted
pair.
If using co-axial telemetry the address switches should be set as:
Blue switch - F Yellow switch - D
DM Oracle Domes
A DM Oracle dome can be connected via either co-axial telemetry or RS485 twisted pair. Oracle
Domes are congured using the specic pages available in the unit software, refer to ‘Oracle
Dome Conguration’ for more information.
The DM Oracle Dome has three address switches, refer to the Oracle Dome documentation for
more information on hardware confguration.
UTC
Red - 1
Blue - N/R
Yellow -
N/R
Serial
Red - 2
Blue - Camera Number
Yellow -
Camera Number