Operating instructions
draft
Dedicated Micros ©2008
14
DV-IP HD
Step 4 Connecting to the Network
The DV-IP HD supports a 10/100Mbps auto-detecting network port. Use a CAT5 cable to connect
the unit to the network.
By default the unit is congured for DHCP (where the unit is automatically allocated an IP address
from the network DHCP server).
DNS (Dynamic Name Servers) is supported and therefore the unit can be assigned a name. This
removes the need for the unit to have a xed IP address and makes it easier for a remote user to
locate. Refer to the ‘Network’ menu section for further information regarding DNS.