Operating instructions

draft

DV-IP HD

Installing the DV-IP HD

This procedure shows the sixteen camera input version.

Step 1 Connecting Video

The DV-IP HD supports up to 8 connected Video Inputs via the 75Ω BNC connectors. Connect

cameras to the video inputs, starting from input 1.

8 and 16 channel variants have two rows of connectors providing video input and loop-through

support. It is possible to use either the top or bottom row of connectors; For consistency and quality

of installation, DM recommend one row is used for video inputs and the other for all required loop-

through connections onto other pieces of equipment e.g. monitors and matrices.

Note:

Remember the last piece of equipment in line must be terminated.

Double termination (not removing termination from the unit) will result in the 1V peak to peak video

signal being crushed. This can reduce the colour rendition of the video source and may cause the

video signal not to be detected by the last piece of equipment i.e. the signal is no longer 1V peak-

to-peak.

5.12