Operating instructions
draft
Dedicated Micros ©2008
102
DV-IP HD
Telemetry Camera Options
The Telemetry camera page allows Oracle Dome cameras to be controlled directly via the Point&go
feature and be sent to preset positions.
The eZoom feature allows navigation within video image i.e. the image from the camera is enlarged
and the operator has the ability to pan around the image. This feature is best utilised with high
resolution cameras, giving the operator the ability to electronically zoom into an area. The unit will
request a higher resolution image of the zoomed area, to show increased detail.
The functionality available will depend on the type of camera being viewed. The unit will recognise
which camera type is being accessed and display relevant symbols in the top right of the screen
(when viewing via a local monitor).
Red Preset If Preset positions have been established for
the PTZ camera, select the Preset option and
enter a preset number. Refer to the ‘PTZ Prole
menu’ for further details on establishing preset
positions.
Green PTZ/ePTZ Switches between PTZ and ePTZ mode. In
ePTZ mode, it is possible to zoom in/out of and
scroll around the image (the camera itself is not
being controlled).
PTZ mode will control an Oracle Dome camera
via the Point&go feature. Refer to the ‘Point&go’
section for further information.
Yellow Aux Activates the camera Auxiliary controls e.g.
wash, wipe etc. Press the Aux button followed by
the relevant Keyboard numeric button (if using
optional connected Keyboard).
Blue Prog Opens the Preset programming menu.
Refer to
‘PTZ Prole’ menu.
Purple Next Opens the next page of the Viewer menu.
Note: The above menu options will only be available when viewing a PTZ camera in Live mode.