Operating instructions

draft

DV-IP HD

Installation

Front Panel connections

Data

DVD-R Internal DVD-R drive (located under hinged ap)

USB

USB2.0 connector (located under hinged ap)

Socket

Can be used to connect an external IR receiver to replace the internal unit (located

under ip down lid)

LED’s Power

- The Power LED will be green to indicate power is connected to the unit

HDD

(Hard Disk Drive) - This will ash when images are being stored to the hard disk

Network

- The Network LED will be green to indicate a connection

Rear Panel connections

REARPANELDWGSERVER.EPS

Video

8. way unit

VID1 to VID8 75Ω BNC composite video input, 1V pk-pk with loop through

MON A

75Ω BNC composite monitor output, 1V pk-pk

MON B

Spot Monitor output

MON A

S Video Connection

HDMI 2x High-Denition Multimedia Interface connectiors

Audio

Audio IN (Dual) RCA (phono) socket, 8KHz/16KHz/22KHz sampling 75Ω input

impedance, 1V pk-pk

Audio OUT (Dual) RCA (phono) socket, line level <100Ω output impedance,1V pk-

pk amplication required