Instruction manual

4
Fig. 6
Step 7: Attach Upper Front Panel [C] to Front Decorative Panel [K] with 2 KD screws.
See Fig. 7
Fig. 7
Step 8: Attach Mid Front Panel [L] to Upper Front Panel [C] and Front Panels [G] with 4
KD screws. See Fig. 8
Fig. 8
Step 9: Install the TOP [A] to the unit as shown in Fig. 9 with 4 KD SCREWS [M]
Fig. 9
Step 10: Tighten all SCREWS.
FIREPLACE INSERT INSTALLATION:
The fireplace insert can be installed after the mantle has been fully assembled.
WARNING: Make sure the fireplace insert controls are in the OFF position and the
unit is NOT plugged in.
Step 1: Place the INSERT in back of the mantel on the floor. Carefully lift the INSERT
into the mantel until the top stopper is against to MANTEL. See Fig. 10
Fig. 10
Step 2: Attach 2 SMALL BRACKETS [N] on the top of insert and lock in place with 2 KD
SCREWS [Q]. Attach 2 Medium Brackets [P] to the bottom of insert with 2 KD screws
[Q]. See Fig. 11.
Fig. 11