Instruction manual

Fig. 1

NOTE: If the KD SCREWS do not ﬁt during assembly, loosen the 2 screws to adjust the

PLASTIC CONNECTOR until the parts/KD SCREWS can be installed.

Step 2: Attach Left Decorative Panel [E] to Side Panel [D] with 3 KD screws [Q]. Attach

Right Decorative Panel [F] to Side Panel [D] with 3 KD screws [Q]. See Fig. 2

Fig. 2

Step 3: Attach 2 Plastic Connectors [R] to Front Panels [G] with 4 KD screws (2 screws

for each connector). Attach Front Panels [G] to Left and Right Decorative Panels [E and

F] with 6 KD screws [Q]. See Fig. 3

Fig. 3

Step 4: Attach 2 plastic connectors [R] to Left and Right Small Panels [H and J] with 4

KD screws (2 screws for each connector). Attach Left Small Panel [H] to Panels D, E

and G with 2 KD screws. Attach Right Small Panel [J] to Panels D, F and G with 2 KD

screws. See Fig. 4

Fig. 4

Step 5: Attach Panels H, G, E and D to Base [B] with 2 KD screws. Attach Panels J, G, F

and D to Base [B] with 2 KD screws. See Fig. 5

Fig. 5

Step 6: Attach 2 Wood Connectors [M] to Front Decorative Panel [K] with 4 KD screws.

Attach Front Decorative panel [K] and wood connectors [M] to Front Panels with 2 KD

screws. See Fig. 6