Instructions / Assembly

1. Bench Top

2. 4 Wooden Legs

3. Bottom Board

4. 4 Feet

Step 1.

Step 2.

Step 3.

Ste

Step 5.

Step 6.

Step 7.

WARNINGS!

F SPILLAGE OCCURS WIPE CLEAN WITH SLIGHTLY DAMP CLOTH IMMEDIATEL

Screw the other three wooden legs one by one

to the bottom of the bench top and gently

tighten the legs. Do not screw the legs too tight.

Put the bottom board over the end of the four

legs, slightly adjust the wooden legs so the

screw holes on the legs are lined with the holes

on the bottom board.

Slightly screw one foot through the bottom

board to connect with the wooden leg.

Slightly screw the other three feet one by one

through the bottom board to connect with the

wooden legs.

Now turn the bench up to right side.If the

bench is not stable enough,please adjust the

legs and feet to make it stable.

Bench Assembly Instruction

BEFORE YOU DO THE ASSEMBLY, PLEASE READ THIS ASSEMBLY INSTRUCTION

CAREFULLY, PLEASE FOLLOW THIS INSTRUCTION FOR ASSEMBLY TO AVOID

ASSEMBLY DIFFICULTY.

COMPONENTS:

Take all packaging off the bench.Turn bench

top upside down, so it is lying flat on the floor,

make sure the ground is clean and smooth.

and gently tighten the leg.Do not screw the leg

too tight.