Instructions / Assembly

ITEM PART DESC. QTY ITEM PART DESC. QTY

Left wooden

leg

1 G Wooden shelf 1

Right wooden

leg

1 H

Bolts 10

Left wooden

supporter

1 I Allen wrench 1

Right wooden

supporter

1 J Flat washer 10

Wooden

hanger

1 k Leg levelers 4

Storage

compartment

STEP ONE STEP TWO

STEP THREE STEP FOUR

TO PROPERLY HANG YOUR COAT RACK

Place coat rack so the storage compartmen and the metal hanger on the back of the coat rack are against the wall.

Mark the location on the wall for the metal hanger ,create the appropriate sized hole in the wall.

Insert plastic screw anchor into the hole,then insert the screw,spaced so that the hanger will hang from the screw.

Attach wooden legs to wooden shelf and storage

compartment by bolts and flat washers as shown

above.Color label on the leg should match color

label on the storage compartment .

Attach wooden pole to the unit with short bolts and

flat washers.Color label on the leg should match

the color label on the wooden supporter .Please

don't fully tighten the bolts ,leave the bolts a bit

loose.

Assembly Instructions

Laying out all parts and hardware and identifying each part as shown may help you as you

assemble the coat rack.

Attach wooden hanger to the unit with bolts and flat

washers.Color label on the wooden hanger should

match the color label on the wooden supporter .

Screw leg levelers to the end of wooden leg.

Now ,please fully tighten all the bolts .

Turn the unit upright.Finish product .

If the coat rack isn't on the same level, please

adjust the leg levelers a bit.

Please make sure all the bolts are fully tightened

before using this coat rack.