Instructions / Assembly

1. Table Top

2. 4 Wooden Legs

3. Bottom Shelf

4. 4 Feet

Step 1.

Step 2.

Step 3.

Step 4.

Step 5.

Step 6.

Step 7.

Step 8.

IF SPILLAGE OCCURS WIPE CLEAN WITH SLIGHTLY DAMP CLOTH IMMEDIATELY.

Slightly screw one leg to the bottom of the table top

and gently tighten the leg.Do not screw the leg too

tight.

WARNINGS!

Slightly screw the other three legs to the bottom of

the table top and gently tighten the legs.Do not

screw the legs too tight.

Slightly screw one foot through the bottom shelf to

connect with the wooden leg.

Slightly screw the other three feet through the

bottom shelf to connect with the wooden legs.

Now turn the table up to right side.If the table is

not stable enough,please adjust the legs and feet to

make it stable.

Put the bottom shelf over the end of the four legs,

slightly adjust the wooden legs so the screw holes

on the legs are lined with the holes on the bottom

Please remove the “Legs Inside” tag from the knob

of the drawer after assembly.

Accent Table Assembly Instruction

BEFORE YOU DO THE ASSEMBLY, PLEASE READ THIS ASSEMBLY INSTRUCTION

CAREFULLY, PLEASE FOLLOW THIS INSTRUCTION FOR ASSEMBLY TO AVOID

ASSEMBLY DIFFICULTY.

COMPONENTS:

Take all packaging off the accent table.Turn table

top upside down, so it is lying flat on the floor,

make sure the ground is clean and smooth.

PAGE 1
Accent Table Assembly Instruction BEFORE YOU DO THE ASSEMBLY, PLEASE READ THIS ASSEMBLY INSTRUCTION CAREFULLY, PLEASE FOLLOW THIS INSTRUCTION FOR ASSEMBLY TO AVOID ASSEMBLY DIFFICULTY. COMPONENTS: 1. Table Top 2. 4 Wooden Legs 3. Bottom Shelf 4. 4 Feet Step 1. Take all packaging off the accent table.Turn table top upside down, so it is lying flat on the floor, make sure the ground is clean and smooth. Step 2. Slightly screw one leg to the bottom of the table top and gently tighten the leg.