Instructions / Assembly

1. Main Body of the Chest
2. 4 Feet
Step 1.
Step 2.
Step 3.
Step 4.
3 Drawer Storage Assembly Instruction
BEFORE YOU DO THE ASSEMBLY, PLEASE READ THIS ASSEMBLY INSTRUCTION
CAREFULLY. PLEASE FOLLOW THIS INSTRUCTION FOR ASSEMBLY TO AVOID
ASSEMBLY DIFFICULTY.
COMPONENTS:
Take all packaging off the chest.Turn main body of
the chest upside down, so it is lying flat on the
floor.Make sure the ground is clean and smooth.
Slightly screw one foot to the bottom of the chest
body and gently tighten the foot. Make sure the foot
is tightened enough.
IF SPILLAGE OCCURS WIPE CLEAN WITH SLIGHTLY DAMP CLOTH IMMEDIATELY.
WARNINGS!
Now turn the chest up to right side.If the chest is
not stable enough,please adjust the feet to make it
stable.
Slightly screw the other three feet one by one to the
bottom of the chest body and gently tighten the feet.
Make sure the feet are tightened enough.