Instructions / Assembly

• Install Lavatory and Drain according to manufacturer’s
provided installation instructions.
• Remove both Slip Joint Nuts and Black Washers
from Trap System.
• Apply Teflon to two sets of exposed male
threadings of Trap System.
• Insert Horizontal Leg into existing wall waste hole.
• Place one set of Slip Joint Nut and Black
Washer onto Horizontal Leg.
• Place one set of Slip Joint Nut and Black Washer onto
Tailpiece.
• In an upward motion, align Trap System with
Horizontal Leg and Tailpiece.
• Insert Horizontal Leg and Tailpiece into
Trap System.
• Thread both Slip Joint Nuts onto Trap
System.
• Check for leakage.
9100 SerieS
Decorative Bottle Trap
Let your dreams come alive,
Your passions become reality,
Be the envy of your neighbors™;
Changing the way you view the bathroom™
D E C O L A V
®
Roughing-in Dimensions - installation instRuctions
Lavatory
Countertop
Side View
• Replaces Standard P-Trap
13" [33.02 cm]
4 1/2" [11.43 cm]
[4.445 cm]
6" [15.24 cm]
1 1/4" [3.175 cm]
1 3/4"
Wall Cover
Horizontal Leg
Bottle Trap
Black Washer
Slip Joint Nut
Tailpiece
Slip Joint Nut
Black Washer
To the wall