Manual







8

 (If using alone skip to step 4)
o Drill through holes that are already pre-drilled using a 6.5mm drill bit on the side of the
Vanity (A)
where the 5605-2/5605-3 or 5605-4 is being attached. If using both 5605-2/5605-3 and 5600-4
drill holes on both side of Vanity (A).
o With assistance attach Vanity (A) and other desired unit together using Side mounting female screw (F)
and Side mounting male Screw (G).
o Place
Hole cover (E) in the holes to cover screws.
o Refer to Figure #3.
o
NOTE: SIDE MOUNTING FEMALE SCREW (F) AND SIDE MOUNTING MALE SCREW (G) PROVIDED
ON UNITS 5605-2/5605-3 AND 5600-4.
A
G
F
E
Figure #3