Owner Manual_2

GFCI Operation:

The GFCI on the plug of this fan has 2 buttons: “Test”

and “Reset”. If you wish to see if the GFCI circuit is

functioning properly, press the “Test” button. The fan

will immediately shut off as if the GFCI has been

activated and the window between the buttons will

change to black. This lets you know the GFCI circuit

has been activated. Press the “Reset” Button and

the fan can be turned on again and the window

between the buttons will show orange. This indicates

the GFCI circuit has not been activated and the fan

should operate normally.

5. The adjustable mist knob (B) is located on the

front of the fan grill (C).

Select mist volume = 2 - 2 nozzles work

3 - 3 nozzles work

1 - 1 nozzle works

The misting device is preassembled. For a cleaner

appearance, use the enclosed plastic clips to secure

the misting hose to the lower pole. Attach the Valve

onto a standard outdoor hose. Turn your water on at

the spigot and use the lever on the Valve to turn water

on and off.

: The misting nozzles are non-adjustable.

Attempts to turn or rotate the nozzle might loosen

or damage the nozzle and impede it use.

Turn water on and return to the fan.

Turn the fan on and enjoy the natural evaporative

cooling process.

: When not in use, turn the fan off and unplug

it from outlet. Turn the water off at the lever on the

Valve and at the water spigot and disconnect the

Valve from the hose.

Note

Caution

Nozzles (3)

Adjustable

Mist Knob