Owner Manual_2

OPERATING INSTRUCTIONS

1.The speed adjustment knob (K) is located on the

back of fan motor assembly (J).

Select Fan Speed = 0 - off

1- Low Speed

2- Medium Speed

3 - High Speed

Simply rotate knob to desired position to operate.

2. The fan can operate in stationary or oscillation mode.

The oscillation knob (I) is located on the top rear of

fan motor assembly (J). To engage the oscillation function,

simply depress the button. To stop, pull up.

3. The fan features a telescoping upper pole (N). To set

at the desired height, simply loosen and then tighten the

height adjustment knob (P).

4. The fan head can also tilt slightly for added adjustment.

Loosen tilt adjustment knob (L) and pitch the fan head to

the desired angle and then re-tighten.