Owner Manual_2

ASSEMBLY INSTRUCTIONS
4
1. Insert lower pole(R) into top of base(T).
2. From bottom insert the threaded end of the
L-shaped locking screw (W) into the hole of the
washer (V) and through the weight (U) and the
base(T).
3. Turn the L-shaped locking screw (W) clockwise
to securely attach the pole (R) to the base(T).
4. Set the base on the floor and extend the upper
pole (N) to the desired height.
5. Remove locking screw (M) from upper pole (N).
6. Slide fan motor assembly
(J) onto upper pole
(N), aligning screw holes of both. Re-insert and
tighten locking screw(M).
3
J
M
N
Q
1
R
T
U
V
W
U
V
2
T
R
W