SDS

smoke, or apply cosmetics while handling this product.
STORAGE AND HANDLING PRACTICES: Avoid contact with eyes. Store in a tightly sealed container. Store in a cool,
dry, well ventilated area. Protect from physical damage.
8. Exposure controls - personal protection
VENTILATION AND ENGINEERING CONTROLS: Use with adequate ventilation to ensure exposure levels are
maintained below the limits provided below. Use local exhaust ventilation, and process enclosure if necessary, to
control airborne dust. Ensure eyewash/safety shower stations are available near areas where this product is used.
EXPOSURE LIMITS/GUIDELINES
Component Name: CAS # ACGIH TLVs OSHA-PELs NIOSH-TLVs Other
Acrylate Polymer Solution 28205-96-1 Not Listed Not Listed Not Listed Not Listed
Water 7732-18-5 Not Listed Not Listed Not Listed Not Listed
Propylene Glycol 57-55-6 Not Listed Not Listed Not Listed Not Listed
Coalescing Agent
International exposure limits may be established for the components of this product. Please check with competent
authority in each country for the most recent limits in place.
The following information on appropriate Personal Protective Equipment is provided to assist employers in complying
with OSHA regulations found in 29 CFR Subpart I (beginning at 1910.132) or equivalent standard of Canada, or
standards of EU member states (including EN 149 for respiratory PPE, and EN 166 for face/eye protection), and those of
Japan. Please reference applicable regulations and standards for relevant details.
RESPIRATORY PROTECTION: Not required with normal use. If necessary, use only respiratory protection authorized
in the U.S. Federal OSHA Respiratory Protection Standard (29 CFR 1910.134), equivalent U.S. State standards,
Canadian CSA standard Z94.4-93, the European Standard EN149, or EU member states.
EYE PROTECTION: Not normally required however, safety glasses are recommended as appropriate to prevent eye
contact. If necessary, refer to U.S. OSHA 29 CFR 1910.133, Canadian Standards, and the European Standard EN166,
Australian Standards, or relevant Japanese Standards.
HAND PROTECTION: Not required under normal use. If desired, wear rubber gloves to prevent skin contact. If
necessary, refer to U.S. OSHA 29 CFR 1910.138, the European Standard DIN EN 374, the appropriate Standards of
Canada, Australian Standards, or relevant Japanese Standards.
BODY PROTECTION: Not required under normal use. Wear appropriate clothing sufficient to prevent skin contact. If
necessary, refer to appropriate Standards of Canada, or appropriate Standards of the EU, Australian Standards, or
relevant Japanese Standards.
9. Physical and chemical properties
VAPOR DENSITY: Not Available
SPECIFIC GRAVITY @ 20°C: Not Available
VAPOR PRESSURE: Not Available
FREEZING POINT: Not Availble
ODOR THRESHOLD: Mild
APPEARANCE, ODOR and COLOR: This product is a liquid with a
mild odor.
EVAPORATION RATE (n-BuAc=1): Not
Available
SOLUBILITY IN WATER: Not Available
pH: Not Available
BOILING POINT: Not Available
10. Stability and reactivity
STABILITY: Stable
DECOMPOSITION PRODUCTS: Carbon Monoxide and Carbon Dioxide
MATERIALS WITH WHICH SUBSTANCE IS INCOMPATIBLE: None Known
HAZARDOUS POLYMERIZATION: Will Not Occur.
CONDITIONS TO AVOID: None Known
SAFETY DATA SHEET
Page 3 of 5