Instructions / Assembly

12
USE OF THE HOOD
WARNING: NOT SUITABLE FOR USE WITH SOLID-STATE SPEED
CONTROLS.
Safety
Warning: The hood may stop working during an electrostatic
discharge (e. g. lightning). This involves no risk of damage. Switch off
the electrical supply to the hood and reconnect after one minute.
Do not allow the hood to be used by children or persons with reduced
(physical, sensory or mental) capabilities or lack of experience and
knowledge, unless they have been given instruction concerning use of the
appliance by a person responsible for their safety.
Children should be supervised so that they do not play with the appliance.
To avoid the risk of fire, clean the metal filter regularly, be especially
careful with pans containing hot oil and do not flambé food below the hood.
Do not use the hood if it shows signs of damage or imperfection. Contact an
official distributor or authorized dealer.
Accessible parts may heat up when using cooking appliances.
Control Panel
The different control panels are described below. Check the panel model
installed on your hood and see the figure indicated in each case.
Panel with sliding switch (Fig. P1 on page 8)
1. Extractor fan speed - positions: OFF, speed 1, 2 and 3
2. Extractor fan operating control pilot light.
3. Lighting on and off switch.
Panel with electronic button (Fig. P2 on page 8)
1. Lighting on and off.
2. Lighting operating control pilot light.
3. Extractor fan speed - button: speed 1, 2 and 3.
Press the current speed again to switch off the extractor fan.
4. Extractor fan operating speed control pilot light.
Timer: Keep the chosen speed button pressed down for two seconds until
the display flashes. The extractor fan stops after 15 minutes and the lighting
switches off. To cancel the timer: Press the chosen speed button once.
Four-speed panel - Digital display (Fig. P3 on page 8)
1. Lighting on and off.
2. Extractor fan on and off.
3. Decrease extractor fan speed.
4. Extractor fan speed display panel.