Instructions / Assembly

www.decoproductsglobal.com

3.- Bring life to your wall choosing your pattern!

How you will place the planks on your wall? See below options. Give your personal touch.

Choose one:

HERRINGBONE STAGGERED DIAGONAL

4.- Starting Point

(This example is for Staggered Pattern) Place your level and draw with your pencil, a straight line

across the wall. (if you don’t have a level, you can measure from floor the same measure in both

sides of wall i.e: 40 in. and then draw a line)

5.- Choose between Permanent or Temporarily Installation

• Permanent (Liquid Adhesive)

Liquid Nails Fuze It (LN-2000) is reccomended

Along the center-back of each plank, apply enough amount of liquid nails (or a similar high strenght

adhesive). Wait about 15 seconds and then position the first board directly above your reference

line making pressure onto the wall. For better results, you can also nail each plank on its corners

and center. Keep on adding planks both sides until the ends of your reference line. Trim the final

pieces as needed with a cutter knife. For second row and others, always double-check the level until

your wall is complete.

•

Temporarily (Nails)

If you don’t want to work over the base wall, just get a thin plywood panel and create your project

over it using the prior Permanent technique. Then nail or screw the whole panel over the wall on its

corners. You can also take the panel with you if you plan to move from the place.

•

Temporarily (Double sided Tape)

Scotch® Fasteners or Mounting Strips +10Lb are reccomended

For small and medium size projects, you can use double sided fasteners or mounting Strips placing

pieces on each plank corners and center. Follow the instructions of permanent technique changing

Liquid Nails for Tape.