Instructions / Assembly

ManualsBrandsDeco Mirror ManualsBathSpectrum 35 in. Metal Circle Wall Mirror in Gold

#2 Place the mirror on the wall in area chosen.

(Two people are needed for this task).

Position the mirror at the desired height in

the center of the location. With Pencil mark

a dot or line on the very top edge of the arch.

See Fig.1. Set mirror aside In safe place.

#4 From this spot, position the supplied 12” hanging

bracket.The top of the hanging bracket should be

centered on the spot marked on the wall. Mark the

holes at the bottom of the bracket, using the level

to make sure the bracket is level and straight.

Set the bracket and level aside. Fig.3.

#5 Using the Drill and 3/16” Drill Bit-Pre Drill the

holes for the wall anchors. Lightly tap the

plastic wall anchors into place with hammer.

#6 Reposition the 12” bracket and bubble level

and secure to the wall with the screws

provided. Check the level again to determine

that the clip is straight and level. (Fig.4)

#7 Carefully place the mirror with the pre-mounted

bracket onto the installed wall clip. Mirror can be

adjusted side to side by gently sliding the mirror along the bracket.

With mirror centered installation is complete - you look marvelous.

#3 From the mark made on the wall (top of mirror),

using a tape rule, measure down 8.5” to angled

bend on mounting bracket and mark this

locoation on wall.Fig. 2.

#1 Using a tape measure, check the location

where the mirror is to be installed. Be sure

the mirror will fit in the desired location.

Tools Needed:

Pencil and Eraser, Drill and 3/16” Drill Bit,

Screw Gun or Driver with Phillips Head,

Tape Measure, Hammer and Friend to help.

(Two People are required to mount this mirror).

MOUNTING INSTRUCTIONS FOR MIRRORS

Round Metal Framed Mirror

Models: 8087, 8088

Fig.1

Fig.2

Fig.3

Fig.4

Parts List:

• Round Mirror with Mounting Brackets

• 12” Wall Mounting Clip

• 3 Plastic Wall Anchors

• 3 Screws.

• 1 Disposable Level

WARNING: Always wear safety goggles and gloves when handling

glass. Handle mirror Carefully. DO NOT REMOVE-Plastic Protective

Corners until installation is complete. Do not bump mirror against

hard surfaces. Place on towel or soft surface like carpet when handling.

READ INSTRUCTIONS CAREFULLY BEFORE STARTING.

MOUNTING INSTRUCTIONS

Disposable

Level

Measure & Mark

Measure

8.5”

Bracket

Summary of content (1 pages)

PAGE 1
Round Metal Framed Mirror Models: 8087, 8088 MOUNTING INSTRUCTIONS FOR MIRRORS Parts List: • Round Mirror with Mounting Brackets • 12” Wall Mounting Clip • 3 Plastic Wall Anchors • 3 Screws. • 1 Disposable Level Tools Needed: Pencil and Eraser, Drill and 3/16” Drill Bit, Screw Gun or Driver with Phillips Head, Tape Measure, Hammer and Friend to help. (Two People are required to mount this mirror). WARNING: Always wear safety goggles and gloves when handling glass. Handle mirror Carefully.