Use and Care Manual

USE AND CARE SPECIFICATIONS
DeckWise
®
Deck & Wood Brightener Part 2, functions as two products. It is a brightener for weathered
wood and a pre-coating preparation for new or weathered wood.
PHYSICAL PROPERTIES
Physical Properties Oxygenated powder concentrate
Active Ingredient Oxalic Acid
pH in solution 0.7-1.2
Theoretical Coverage Depending on wood age and species, surface porosity and method of application, one (1)
gallon of solution covers approximately 150 sq. ft.
Application Parameters 40°F - 90°F (4°C - 32°C)
Dry Time Allow wood to dry thoroughly before applying a water based finish. Allow a minimum of 24
hours before applying oil based stain or finish.
Biodegradable Active ingredient biodegrades into Inert chemicals
Safety Information For additional information, see SDS
Questions/Comments: www.DeckWise.com
DeckWise
®
, The Ipe Clip
®
Fastener Company, LLC • 2111 58th Ave. East, Bradenton, FL 34203C • All rights reserved. ©Copyright 2017
The Ipe Clip
®
Fastener Company, LLC
The Ipe Clip
®
Fastener Company, LLC
Phone: [phone] • Email: [e-mail]
Web: www.DeckWise.com
DeckWise
®
Deck & Wood
Brightener Part 2
The suggestions and technical data for use contained herein are accurate to the best of our knowledge. It is offered in good faith that the
statements of this publication does not constitute any warranty, either implied or expressed, as to the performance of this product. As use and
conditions our products are outside our control, we can only guarantee these products to adhere to our criteria of quality. Our liability, if any,
will certainly be limited to only replacing defective product. All technical information stated is at all times subject to change without prior notice.