Installation Guide

1. Clean, rinse, & let dry 2. Apply 2 coats wet over wet 3. backbrush any puddles
Protect Your Deck with Ipe Seal
®
Ipe Seal® is a wax emulsion sealer proven to increase the
structural integrity of hardwood decking. Once applied
to freshly cut, exposed wood end grain, Ipe Seal® creates
a bond that extends the life of each deck board while also
preventing splits (end checking) and unsightly cracks.
1
The Ipe Clip
®
Fastener Company, LLC
The Ipe Clip
®
Fastener Company, LLC
Phone: [phone] • Toll free: 866-427-2547
Email: [e-mail] • www.DeckWise.com
with WiseCoat
TM
without WiseCoat
TM
2
3
EASY APPLICATION! Always mix well before using. Do not apply in rain.
For best results, rst clean surface with DeckWise® Cleaner and Brightener.
Treated with Ipe Seal
®
Untreated End-cut
For complete Use & Care instructions go to: www.deckwise.com
e WISECOAT
™
Amber tint enriches the natural splendor and beauty of
hardwoods without drastically changing the natural color of the wood.
Semi-Transparent Tint
Enhance Both Light & Dark Hardwoods
Always test wood preservative products
on scrap wood prior to application. Call
DeckWise® at 866-427-2547 to receive
a sample to ensure your expected results
are acceptable.
WiseCoat
™
provides long-lasting protection
against water intrusion for six (6) years on
horizontal surfaces and ten (10) years on
vertical surfaces, when used according to
the product instructions.
There is no warranty against color fading, whether expressed or implied. In order to maintain
color, it is advised to do so with a yearly maintenance plan. Depending on regional climate
conditions, additional coats may be applied to restore the preferred natural wood tint color.