Safety Data Sheets (SDS)

DECKWISE
®
, THE IPE CLIP
®
FASTENER COMPANY, LLC
SAFETY DATA SHEET
DeckWise® WiseCoat™
DeckWise
®
, The Ipe Clip
®
Fastener Co., LLC Page 2 of 6
INHALATION: If breathing becomes difficult, remove victim to fresh air. If necessary, use artificial respiration to
support vital functions. Seek medical attention.
INGESTION: If large quanties of this product is swallowed, call physician or poison control center for most current
information. If professional advice is not available, do not induce vomiting. Never induce vomiting or give diluents
(milk or water) to someone who is unconscious, having convulsions, or who cannot swallow. Seek medical advice.
Take a copy of the label and/or SDS with the victim to the health professional.
MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE: No data available.
4.2 SYMPTOMS AND EFFECTS, BOTH ACUTE AND DELAYED:
No data available.
4.3 RECOMMENDATIONS TO PHYSICIANS:
Treat symptoms and eliminate overexposure.
SECTION 5. FIRE-FIGHTING MEASURES
5.1 FIRE EXTINGUISHING MATERIALS:
Use fire extinguishing methods below:
Water Spray: Yes Carbon Dioxide: Yes
Foam: Yes Dry Chemical: Yes
Halon: Yes Other: Any “C” Class
Note: Do not direct solid stream of water or foam into burning pools.
5.2 UNUSUAL FIRE AND EXPLOSION HAZARDS:
Under normal use, no special measures are required.
Explosion Sensitivity to Mechanical Impact: No
Explosion Sensitivity to Static Discharge: No
5.3 SPECIAL FIRE-FIGHTING PROCEDURES:
Incipient fire responders should wear eye protection. Structural firefighters must wear Self-Contained Breathing
Apparatus and full protective equipment. Isolate materials not yet involved in the fire and protect personnel. Move
containers from fire area if this can be done without risk; otherwise, cool with carefully applied water spray. If
possible, prevent runoff water from entering storm drains, bodies of water, or other environmentally sensitive areas.
SECTION 6. ACCIDENTAL RELEASE MEASURES
6.1 PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY PROCEDURES:
To prevent skin and eye contact under the foreseeable conditions of use, wear appropriate protective clothing and
safety eyewear. When handling, do not eat, drink, or smoke. Wash thoroughly after handling. Handle in a well-
ventilated work area.
6.2 ENVIRONMENTAL PRECAUTIONS:
If possible, prevent entry to sewers, storm drains, surface waters, and soils.
6.3 SPILL AND LEAK RESPONSE:
Spilled product should be removed immediately to avoid formation of dust. Remove by mechanical means (i.e.
vacuuming). Dilute remainder with plenty of water (avoid formation of aerosols). Ensure sufficient ventilation. Wash
contaminated clothing.
SECTION 7. HANDLING and STORAGE
7.1 PRECAUTIONS FOR SAFE HANDLING:
To prevent skin and eye contact under the foreseeable conditions of use, wear appropriate protective clothing and
safety eyewear. When handling, do not eat, drink, or smoke. Wash thoroughly after handling. Handle in a well-
ventilated work area.
7.2 STORAGE AND HANDLING PRACTICES:
Keep away from incompatible materials. Keep in a dry, well-ventilated area in closed containers. Protect containers
from physical damage.
7.3 SPECIFIC USES:
See Section 1.2.