How to Guide

Ipe Seal® is a wax emulsion sealer proven to increase the structural integrity of

hardwood decking. Once applied to freshly cut, exposed wood end grain, Ipe Seal®

creates a bond that extends the life of each deck board while also preventing splits

(end checking) and unsightly cracks.

1. Scrub Clean & let dry 2. Apply Ipe Oil

3. Wipe off excess

Easy Application, Exceptional Results - Easy As 1,2,3

SHAKE, STIR & MIX WELL • Questions/Comments: www.DeckWise.com

1 QUART 5 GALLONS

1 quart per 500 sq ft. of lumber.

Exclusive products of DeckWise®, e Ipe Clip® Fastener Co. LLC.

Local: 941.896.9851 Toll Free: 1.866.427.2547

Protect Your WOOD with Ipe Seal

APPLICATION

Always clean dirty wood end grain

before applying Ipe Seal®. Apply a

liberal even coating to the end grain

of the wood. Brush from the bottom

upwards on deck boards and apply

liberally on log ends. orough,

complete coverage of the end grain

will maximize the benets for

your lumber.

nish strong with ipe oil