TDS
Page 2 of 3
PRODUCT NAME: IPE SEAL
After Eye Contact: Flush eyes immediately with large amounts of water, using soap if possible. Remove contact lenses if present
and easy to do. If irritation continues, seek medical attention.
After Skin Contact: Wash with plenty of soap and water. Remove contaminated clothing. If irritation persists, seek medical attention.
After Swallowing: Rinse mouth. Drink large amounts of water. Do not induce vomiting (aspiration hazard). Seek medical help
immediately for ingestion of wax and soap.
Most important symptoms and effects, both acute and delayed: No further relevant information available.
Indication of any immediate medical attention and special treatment needed: No further relevant information available.
Extinguishing Media: Water spray, dry chemical, carbon dioxide (CO
2
), foam. Do not direct solid stream of water or
foam into burning pools.
Other Fire or Combustion Hazards: Incomplete combustion can produce carbon monoxide.
Fire Fighting Instructions: Avoid breathing smoke and vapor.
Fire Fighting Equipment: Self-contained breathing apparatus and protective clothing.
Personal Protection: Wear protective gloves and eye protection plus rubber boots when containing large spills.
Precautions: Do not allow to enter sewers / surface or ground water.
Containment and Clean-up: Large spills: contain with dikes, collect, and filter for reuse.
Small spills: collect or absorb with oil absorbent pads.
Clean contaminated areas with soap and water. All spill response and disposal should be carried out in
accordance with local, regional and federal regulations.
General: Keep containers closed to minimize evaporation and skin formation.
Handling: Use normal precautions and protective equipment to avoid exposure to eyes and skin.
Storage: Store at ambient temperature, above 5ºC / 40ºF. Product can be damaged by freezing.
Ventilation: Good ventilation in work area, atmospheric pressure.
Personal Protection: Eyes: safety glasses or splash goggles
Hands: protective gloves
Other: synthetic apron for cleanliness
Physical State: Liquid Odor: slight petroleum oil odor
Appearance/Color: White or colored liquid of paint-like consistency
Viscosity: 3,500 – 4,500 Cps at 25°C / 77°F (LVT Brookfield)
Flash Point:
No flash - boils at 100ºC / 212ºF
Auto ignition temperature:
n/a
Boiling Point:
100ºC / 212ºF
Melting Point of Mixture:
0ºC / 32ºF
4. FIRST AID MEASURES
5. FIRE FIGHTING MEASURES
6. ACCIDENTAL RELEASE MEASURES
7. HANDLING AND STORAGE
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
9. PHYSICAL & CHEMICAL CHARACTERISTICS