SDS

SAFETY DATA SHEET
Page 4 of 7
RESPIRATORY PROTECTION: Maintain airborne contaminant concentrations below guidelines listed above, if
applicable. If necessary, use only respiratory protection authorized in the U.S. Federal OSHA Respiratory Protection
Standard (29 CFR 1910.134), equivalent U.S. State standards, Canadian CSA Standard Z94.4-93, the European
Standard EN149, or EU member states.
EYE PROTECTION: Safety glasses are recommended. If necessary, refer to U.S. OSHA 29 CFR 1910.133 or
appropriate Canadian Standards.
HAND PROTECTION: Use protective gloves as appropriate to minimize skin contact. If necessary, refer to U.S. OSHA
29 CFR 1910.138 or appropriate Standards of Canada.
BODY PROTECTION: Use body protection appropriate to prevent contact (e.g. lab coat, overalls). If necessary, refer to
appropriate Standards of Canada, or appropriate Standards of the EU, Australian Standards, or relevant Japanese
Standards.
SECTION 9 - PHYSICAL and CHEMICAL PROPERTIES
Information on basic physical and chemical properties
PHYSICAL STATE:
Low viscosity liquid
ODOR:
Characteristic odor
ODOR THRESHOLD (PPM):
Not Available
APPEARANCE / COLOR:
Liquid
pH:
Not Available
MELTING /
FREEZING POINT (
F
°
):
Not Available
BOILING POINT (
F
°
):
150-290°C / 302-554°F
FLASH POINT
(
F
°
)
:
40°C /104°F
EVAPORATION RATE (nBuAc = 1):
Not Available
FLAMMABILITY (solid, gas):
Not Applicable
FLAMMABLE LIMITS (in air by volume, %)
: Not Available
VAPOR PRESSURE (mmHg):
Not Available
VAPOR DENSITY (AIR=1):
Not Available
RELATIVE DENSITY
Not Available
SOLUBILITY IN WATER (%)
Limited
PARTITION COEFFICIENT: N
-
OCTANOL/WATER:
Not Applicable
AUTOIGNITION TEMPERATURE
: Not Available
DECOMPOSITION TEMPERATURE:
Not Applicable
VISCOSITY:
Not Available
EXPLOSIVE PROPERTIES:
Not Applicable
OXIDISING PROPERTIES:
Not Applicable
Other Information
SPECIFIC GRAVITY 4
°
C: (Water = 1)
0.92
PERCENT SOLIDS BY WEIGHT:
50-55%
PERCENT VOLATILE BY WEIGHT:
45-50%
VOC: WITH WATER / EXEMPT MATERIALS: .53 LBS/GAL
WITHOUT WATER / EXEMPT MATERIALS: .84 LBS/GAL
SECTION 10 - STABILITY and REACTIVITY
Reactivity
:
Not reactive under normal conditions.
Chemical Stability
:
Product is stable under recommended storage conditions.
Possibility of Hazardous Reactions
:
No data available.
Conditions to avoid
:
Extreme temperatures, sources of ignition.
Incompatible materials
:
Strong oxidizing agents
Hazardous Decomposition Products: Burning may produce carbon monoxide, carbon dioxide, and formaldehyde..