Safety Data Sheets (SDS)

1345872 - Ipe Oil Hardwood Deck Finish 1 Gal. Natural Wood Oil

Based Exterior Water Repelling Stain With UV Protection

Revision Date 28-Nov-2016

_____________________________________________________________________________________________

Page 5 / 13

6. ACCIDENTAL RELEASE MEASURES

Personal precautions, protective equipment and emergency procedures

Personal precautions

Avoid contact with skin, eyes or clothing. Ensure adequate ventilation. Use personal

protective equipment as required. Evacuate personnel to safe areas. See section 8 for

more information. Keep people away from and upwind of spill/leak. ELIMINATE all ignition

sources (no smoking, flares, sparks or flames in immediate area). Pay attention to

flashback. Take precautionary measures against static discharges. All equipment used

when handling the product must be grounded. Do not touch or walk through spilled

material.

Other Information

Water spray may reduce vapor; but may not prevent ignition in closed spaces.

Environmental precautions

Prevent entry into waterways, sewers, basements or confined areas.

Methods and material for containment and cleaning up

Methods for containment

A vapor suppressing foam may be used to reduce vapors. Absorb or cover with dry earth,

sand or other non-combustible material and transfer to containers.

Methods for cleaning up

Use clean non-sparking tools to collect absorbed material. Dike far ahead of liquid spill for

later disposal. Soak up with inert absorbent material. Pick up and transfer to properly

labeled containers.

7. HANDLING AND STORAGE

Precautions for safe handling

Handling

Handle in accordance with good industrial hygiene and safety practice. Avoid contact with

skin, eyes or clothing. Do not eat, drink or smoke when using this product. Take off

contaminated clothing and wash before reuse. Use personal protection equipment. Avoid

contact with skin and eyes. Avoid breathing vapors or mists. Keep away from

heat/sparks/open flames/hot surfaces. - No smoking. Use grounding and bonding

connection when transferring this material to prevent static discharge, fire or explosion. Use

with local exhaust ventilation. Use spark-proof tools and explosion-proof equipment. Keep

in an area equipped with sprinklers. Use according to package label instructions.

Conditions for safe storage, including any incompatibilities

Storage

Keep containers tightly closed in a dry, cool and well-ventilated place. Store locked up.

Keep away from heat, sparks, flame and other sources of ignition (i.e., pilot lights, electric

motors and static electricity). Keep in properly labeled containers. Do not store near

combustible materials. Keep in an area equipped with sprinklers. Store in accordance with

the particular national regulations. Store in accordance with local regulations.

Incompatible Products

Strong acids. Strong oxidizing agents. Strong bases.