Specification
B
E
A C
F
D
E
C
D
Coverage varies, see coverage page in this manual.
* If using 1-1/2" or thicker material, you may need to upgrade to a longer screw option
than what is typically packaged with the fastening kit.
** For decking 8" or wider, the (A) dimension should be at least 1-1/2". Using a wide plank
such as this for surface decking will most likely cause cupping issues regardless of how the
material is fastened if thicker material is not used.
*** is formula will create a symmetrical prole that allows you to ip and/or rotate the
decking to be able to put the best side up.
**** Fastener automatically achieves correct gap spacing when boards are pushed tight
during installation.
Groove Dimensions
ickness of Cut Cutting Height Cutting Depth
C = 5/32" (4mm) D*** = (A-5/32")/2 E = 1/2" (13mm)
Board Dimensions
Board ickness Board Width
A* = Measurement Of
Your Decking
B** = Measurement Of
Your Decking
Board Spacing
During Installation
F**** = 1/4" (6,35mm)
DeckWise® ExtremeKD™ Installation Specications
Complete Kit Contains
(175) IPE CLIP® ExtremeKD™
Hidden Deck Fasteners
(190) #8x2" Colormatch Black
Stainless Steel Star Drive Screws
(12) 3/8" Tapered Ipe Plugs
(1) 1/8" High Speed Drill Bit
(1) T15 Star Drive Tip
(3) 1/4" Spacer Tools
(1) Instruction Sheet
100 Ct. Kit Contains
(100) IPE CLIP® ExtremeKD™
Hidden Deck Fasteners
(100) #8x2" Colormatch Black
Stainless Steel Star Drive Screws
(3) 1/4" Spacer Tools
(1) Instruction Sheet
1/4" Spacer Tool Included
1/8" High Speed Drill Bit T15 Star Driver Bit
3/8" Tapered Ipe Plugs
#8x2" Colormatch Black
Stainless Steel Star Drive Screws
2 Gal. Contractor Bucket 5 Gal. Contractor Bucket
(525) Hidden Deck Fasteners
(565) Stainless Steel Deck Screws
(6) 1/4" Spacer Tools
(3) T15 Star Drive Tips
(3) 1/8" High Speed Drill Bits
(1) Instruction Sheet
(1050) Hidden Deck Fasteners
(1130) Stainless Steel Deck Screws
(6) 1/4" Spacer Tools
(5) T15 Star Drive Tips
(5) 1/8" High Speed Drill Bits
(1) Instruction Sheet
These products are protected under one or more of the following patents; D485,160; 8,464,488; Other Patents Pending, and/or D470,039 product is licensed under U.S. Patent No. 6,402,415
Features:
• is system automatically spaces deck boards at 1/4" (6.35mm)
• Manufactured from polyethylene with stainless steel;
black oxide insert
• For use with kiln dried hardwood, composite, or PVC decking
• Allows for expansion of width of kiln dried hardwoods
• Allows movement of length with composite/PVC decking
• Unique design allows for more tolerance in grooved side prole
while increasing hold-down area
• UV resistant
• Limited Lifetime Warranty
e method of 45 degree screws hold the decking tight to the joist, while allowing one side of the deck board to remain free to expand.
This illustrates how the composite decking moves on its length.
13