Specification

™
Kiln Dried Lumber, & Composites
Gap Spacing 1/4" (6,35mm)
Features:
• is system automatically spaces deck boards at 1/4" (6.35mm)
• Manufactured from polyethylene with stainless steel;
black oxide insert
• For use with kiln dried hardwood, composite, or PVC decking
• Allows for expansion of width of kiln dried hardwoods
• Allows movement of length with composite/PVC decking
• Unique design allows for more tolerance in grooved side prole
while increasing hold-down area
• UV resistant
• Limited Lifetime Warranty
Fastener Dimensions
.995" (25,27mm)
.250" (6,35mm)
.390" (9,91mm)
.148"
(3,76mm)
.242"
(6,15mm)
Decking Compatibility
Air-Dried Decking
Kiln-Dried Decking
Composite/
PVC Decking
Clip Construction
Material
Stainless Steel Insert
Available Colors
Polyethylene
.883" x .883"
ickness: .036"
Allows Expansion/Contraction Along the Length of Composite/PVC Decking
Allows Expansion on the Width of Kiln-Dried Lumber
e method of 45 degree screws hold the decking tight to the joist, while allowing one side of the deck board to remain free to expand.
1/4" (6,35mm)
AFTER EXPANSION OF BOARDS
During Installation
After Installation - DECREASED GAP SPACING
1/4" (6.35mm)
12
×
✓
✓
During Installation
This illustrates how the composite decking moves on its length.
Running screws straight down with composite/PVC decking allows these materials to naturally move on their length.
Manufactured By DeckWise®
Hardened stainless steel insert with
a black oxide coang inside UV and
chemical-resistant polyethylene.
Hollow leg acts as a shock absorber
as kiln-dried materials expand.
Use With Exotic Hardwoods, ermally Modied Sowoods
& Composite Decking.