Product Manual B

DECKED.COM | #DECKEDUSA | @DECKEDUSA MT5 / MT7 | v.1.1 | Page 14

➡

CAB

INSTALL: DECK HALVES

• Loosely place driver side deck panel on driver side stud, center vert and ammo can.

• Shift tailgate ammo can forward, rearward, L-R, as necessary to align with fully seated deck panel.

• Loosely assemble:

• Five bolts (without washers) through deck panel into center vert; BAG S1.

• Four bolts with nylon and rubber washers installed in order shown in DETAIL A through deck panel into

stud; BAG S1, BAG MS WASHERS.

• Eight bolts with nylon and rubber washers installed in order shown in DETAIL A through deck panel into

tailgate ammo can; BAG S1, BAG MS WASHERS.

• Tighten all S1 bolts.

• Securely tighten driver side C-Channel/ammo can nut and bolt.

• Repeat passenger side (make sure you don't forget to securely tighten passenger side C-Channel/ammo can

nut and bolt).

NYLON WASHER

RUBBER WASHER

DETAIL A

NYLON WASHER

RUBBER WASHER

RECOMMENDED TORQUE:

Bolts in labeled bag S1 - 27 in-lb.