Installation Guide

MT5 | V1 | Page 7
STUD BRACKET
TOP HOLE
CABSIDE BRACKET
(GREY)
STEP 1
STEP 2
NOTE: Make sure centerline arrows on
cabside vert are aligned with your
centerline mark (blue).
STEP 3
KEEP LOOSE TIGHTEN
THREE
3 1/2"
BOLTS
3/4" BOLT
CAB
CAB
ASSEMBLY: BRACKETS + MOUNTING
STEP 1: Securely attach stud bracket to driver side stud using three 3 1/2" bolts and three flanged nuts;
BAG PREP-MT5.
STEP 2: Loosely attach cabside bracket to the top hole in stud bracket with 3/4" bolt and flanged nut;
BAG PREP-MT5.
Repeat STEP 1 and STEP 2 on passenger side.
STEP 3: While supporting both ends, lift center vert + stud + cabside vert assembly in truck bed.
FLANGED NUT
CAB
FLANGED
NUTS