Installation Guide

MN3 | V1 | Page 11

➡

CAB

INSTALL: DECK HALVES

• Loosely place driver side deck panel on driver side stud, center vert and ammo can.

• Shift ammo can forward, rearward, L-R, as necessary to align with fully seated deck panel.

• Loosely assemble:

• Five bolts (without O-rings) through deck panel into center vert; BAG S1.

• Four bolts with O-rings through deck panel into stud; BAG S1, BAG O-RINGS.

• Eight bolts with O-rings through deck panel into ammo can; BAG S1, BAG O-RINGS.

• Tighten all S1 bolts.

• Securely tighten driver side C-Channel/ammo can nut and bolt.

• Repeat passenger side (make sure you don't forget to securely tighten passenger side C-Channel/ammo can

nut and bolt).