Product Manual B

MF3 & MF4 | v.1 | Page 12

DECKED.COM | #DECKEDUSA | @DECKEDUSA

INSTALL: DECK HALVES

• Loosely place deck panel on side stud, center vert and ammo can.

• Shift ammo can forward, rearward, L-R, as necessary to align with fully seated deck panel.

• Loosely assemble:

• Five bolts through deck panel into center vert; BAG S1.

• Four bolts with nylon and rubber washers installed as shown through deck panel into stud;

BAG S1, BAG MS WASHERS.

• Eight bolts with nylon and rubber washers installed as shown through deck panel into ammo can;

BAG S1, BAG MS WASHERS. Use the four nylon washers from BAG S1 and remaining 20 nylon washers

from BAG MS WASHERS to complete this step for both sides.

• Tighten all S1 bolts.

• Securely tighten C-Channel/ammo can nuts and bolts.

• Repeat other side (making sure you don't forget to securely tighten C-channel/ammo can nuts and bolts).

DETAIL A

➡

CAB

NYLON WASHER

RUBBER WASHER

RECOMMENDED TORQUE:

Bolts in labeled bag S1 - 27 in-lb.