Instructions / Assembly

PREPARE BED: INSTALL SHIMS

• There are 3 SHIMS provided; 2 narrow (detail A) and 1 wide (detail B)

• Using the information in the respective circular detail views:

a) Clean the surfaces thoroughly where the shims will be located (isopropyl alcohol is

recommended).

b) Remove the layer of tape on the bottom of the shim to expose the adhesive surface.

c) Place the shim and apply with pressure.

NOTE: Repeat detail A passenger side.

CABSIDE

TAILGATE

8 3/4”

DETAIL A

Align shim with cabside panel of bed, place between floor

beads shown. Repeat on passenger side.

DETAIL B

Place shim 8 3/4” from seam in floor (blue).

Align in center of floor beads as shown.