Product Manual B
DECKED. COM | #DECKEDUSA | @DECKEDUSA DR6 / DR7 | v.4 | Page 11
2" BOLT
CORNER
BRACKET
HELPFUL TIP: If you purchased drain
plugs, install now (instructions are
included with drain plugs).
TUBE BRACE
GOES HERE
DRAWER 1
DRAWER 3
DRAWER 1
➡
CAB
WHEELS C
DRAWERS: BRACKETS + WHEELS
(SO EASY A CHIMPANZEE CAN DO IT)
• Each drawer has a left and a right bracket. Bolt the brackets into place via bottom two holes in bracket with 3/4"
length bolts. Use the 2" length bolt for the upper cabside wall hole in bracket; BAG DRAWER 1.
• Install a tube brace in each drawer with two 3/4" length bolts; BAG DRAWER 1, BAG DRAWER 3.
• Attach wheels onto the drawer brackets with a 7/32" hex wrench; BAG WHEELS C.
RECOMMENDED TORQUE:
Bolts in labeled bags DRAWER 1 and DRAWER 3 - 27 in-lb.
Bolts in labeled bag WHEELS C- 90 in-lb.