Product Manual B
DECKED. COM | #DECKEDUSA | @DECKEDUSA DR6 / DR7 | v.4 | Page 7
ASSEMBLY: PASSENGER’S SIDE DECK
(NOW YOU’RE ACTUALLY GETTING SOMEWHERE!)
• Place C-channel on the inside ledges of a cabside ammo can and a tailgate ammo can.
• The end of the C-channel with the endplate must rest on the cabside ammo can.
• You should have the correct tailgate ammo can for this step. The axle will be on the tailgate side of the system.
If not, swap the tailgate ammo cans now.
• Loosely bolt C-channel to the two ammo cans with (4) nylon washers on
the (4) bolts. Make sure the bolt head is on the C-channel side, not inside
the ammo can; BAG CCHANNELS C. Don’t tighten yet.
• Line up the passenger’s side deck (sticker on end of deck panel indicates RIGHT/PASSENGER) on top of the
C-channel/ammo can assembly.
• Bolt the deck to the ammo cans; BAG B1 for the tailgate ammo can, BAG CS AMMO CAN for the cabside ammo can.
• Now go back and tighten the loose bolts connecting the ammo cans to the C-channel.
• Grab your buddy to help you lift the assembly into the passenger side of the truck bed.
TAILGATE AMMO CAN AXLECABSIDE AMMO CANCCHANNEL ENDPLATE
CS AMMO CANS
B1
CCHANNELS C
PASSENGER SIDE DECK HALF
CAB
➡
RECOMMENDED TORQUE: Bolts in labeled bags C-CHANNELS C,
CS AMMO CAN and B1 - 27 in-lb.
NYLON WASHER