Product Manual B

Page 14 | v.4 | DR6 / DR7 DECKED. COM | #DECKEDUSA | @DECKEDUSA
FINAL FS
FINAL FS
FINAL FS
INSTALL: THE FUN STUFF
(PARTY TIME!)
MAKE SURE THE CENTER VERT IS IN THE CENTER OF YOUR BED; the gaps on either sidewall may not be equal
because the world isn’t perfect and neither is your truck bed.
• Alternately and gradually tighten all J-hooks to ensure DECKED is centered and secure. Recommended torque: Nuts
in labeled bags J6 - 10 in-lb. Do not tighten one side of J-hooks all the way in one step. DO NOT OVERTIGHTEN
J-HOOKS!
NOTE: If the DECKED system is noticeably “crowned”, the J-hooks are too tight.
• Install the window covers in the cabside ammo cans (from inside the ammo can).
CAUTION: The following are small gauge screws – light, hand-tightening is all that is required.
• Center and screw on the ruler/edge guard; BAG FINAL FS.
• Screw on the bottle opener; BAG FINAL FS.
• Install lock core plugs; BAG FINAL FS, or install locks if purchased.
IMPORTANT: Grab your favorite beverage, crack ‘er open in the bottle opener and toast your truck. You did it.
Immediately post a photo of your significant other, child or canine (in no order of significance) appreciating
your accomplishment. Add hashtag #DECKEDUSA | @DECKEDUSA.
#DECKEDUSA | @DECKEDUSA
RECOMMENDED TORQUE: Nuts for J-hooks in labeled bags J6C - 10 in-lb.