Product Manual B

DECKED.COM | #DECKEDUSA | @DECKEDUSA DG6/DG7/DG8 | v.6 | Page 7
B
A
TAILGATE BRACKET
Place tailgate bracket below bottom cargo tie down ring as shown.
Place clamp plate above cargo tie down. Attach with bolt, nylon
washer and nut as shown; BAG: PREP DG6/DG7/DG8.
Tighten securely. Repeat on passenger side.
1” BOLT
CLAMP PLATE
TAILGATE BRACKET
(Place hole tailgate side)
FLANGED NUT
CABSIDE BRACKET
Place cabside bracket above bottom cargo tie down ring as
shown. Place clamp plate below cargo tie down. Attach with bolt,
nylon washer and nut as shown; BAG: PREP DG6/DG7/DG8.
Tighten securely. Repeat on passenger side.
CLAMP PLATE
1” BOLT
FLANGED NUT
DG8 PREP BED: BRACKET INSTALL
STOP:
PREP DG6/DG7/DG8 PREP DG6/DG7/DG8
NYLON WASHER
CABSIDE BRACKET
(There is a L-R bracket, make
sure bracket opens toward cab)
NYLON WASHER
RECOMMENDED TORQUE: Bolts in labeled bags PREP DG6/DG7/DG8 - 53 in-lb.
➡
➡
CAB
CAB
➡
CAB
Double check that you have a 2500/3500 Silverado/Sierra with a 6’9” bed [DG8]. If
you have the 5’9” bed [DG6] or a 6’6” bed [DG7], go back to the previous page 6.