Product Manual B

DECKED.COM | #DECKEDUSA | @DECKEDUSA DG6/DG7/DG8 | v.6 | Page 17
IMPORTANT: Grab your favorite beverage, crack ‘er open in the bottle opener and make a toast to your truck. You did it. Immediately
post a photo of your significant other, child or canine (in no order of significance - please someone show us your pet alligator)
appreciating your accomplishment. Add hashtag #DECKEDUSA | @DECKEDUSA.
LOCK CORE
PLUGS
1/4” SCREWS
TIGHTEN: JHOOKS
• Finally, tighten the J-hooks, gradually and alternatively. DO NOT OVER TIGHTEN.
IMPORTANT: Make sure to center the vert in the center of your bed. Don’t worry about side gaps, center the vert on
the center rib of the bed.
• Install thread bolt protectors on J-hook ends, if provided.
• Install ruler by aligning the ruler holes with the inserts in the decks. Use your fingers to start the 1/4” screws to
avoid cross-threading. Tighten just until snug with a 1/8” Allen wrench.
• Insert lock core plugs, or install locks if purchased.
• Nice job. Your mother and I are very proud of you.
RECOMMENDED TORQUE: J-hooks - 9 in-lb.