Product Manual B

DG6/DG7/DG8 | v.6 | Page 10DECKED.COM | #DECKEDUSA | @DECKEDUSA
2" BOLT
CORNER
BRACKET
TUBE BRACE
GOES HERE
DRAWER 1
DRAWER 3
DRAWER 1
➡
CAB
WHEELS
DRAWERS: BRACKETS + WHEELS
(IT’S ALL BALL BEARINGS THESE DAYS)
• Each drawer has a left and a right bracket. Bolt the brackets into place via bottom two holes in bracket with 3/4"
length bolts. Use the 2" length bolt for the upper cabside wall hole in bracket; BAG DRAWER 1.
• Install a tube brace in each drawer with two 3/4" length bolts; BAG DRAWER 1, BAG DRAWER 3.
• Attach wheels onto the drawer brackets with a 7/32" Allen wrench; BAG WHEELS.
HELPFUL TIP: If you purchased drain
plugs, install now (instructions are
included with drain plugs).
RECOMMENDED TORQUE:
Bolts in labeled bags DRAWER 1 and DRAWER 3 - 27 in-lb.
Bolts in labeled bag WHEELS - 90 in-lb.