Installation Guide
4B
4C
4A
CCHANNEL
STEP 4: PASSENGER SIDE DECK ASSEMBLY
CABSIDE
AMMO CAN
TAILGATE
AMMO CAN
PASSENGER SIDE DECK HALF
• Loosely bolt C-channel to the ledges on the inside of the two ammo cans. Make sure bolt head is
on the C-channel side, not inside ammo can; bag 4A. NOTE: The small rectangular slot in the
C-channel indicates the tailgate end.
• Line up the deck (sticker indicates passenger deck half) on top of the C-channel/ammo can assembly
and the vert bosses. NOTE: Tailgate side of vert has an axle hole at the bottom.
• Bolt deck to C-channel/ammo can assembly; bag 4B for driver side tailgate ammo can, bag 4C for
driver side cabside ammo can. NOTE: bag 4C only has 4 screws for 6 spots. Do not use the two
spots along the cabside edge of ammo can (see STEP 3 for reference).
• Tighten bolts connecting ammo cans to C-channel.
• Grab your buddy to help you lift assembly onto passenger side of truck bed.
RECTANGULAR
HOLE IN CCHANNEL