Manualshelf

Installation Guide

ManualsBrandsDECKED ManualsTool StoragePick Up Truck Storage System for Ford F150 Aluminum (2015 - Current), 5 ft. 6 in. Bed Length
12345678910
REMOVE FACTORY TIE DOWN BRACKET
SAVE THE BOLTS
PREPARE BED: BRACKET INSTALLATION
• The Aluminum Ford F150’s require a shim between both cabside ammo can brackets and the truck.
• Remove cabside factory tie-downs on both sides of truck bed (T30 Torx driver) and SAVE THE BOLTS.
• Aluminum and coated steel don’t like each other. Install cabside ammo can brackets on both sides of
the truck with the soft rubber shim placed between the bracket and the sidewall; bag 3A.
NOTE: Use factory tie down bolts for DECKED brackets.
DECKED
TIEDOWN BRACKET
3A
FACTORY
TIEDOWN BRACKET
SHIM (SHOWN IN GREEN)
DECKED BRACKET (INSTALL WITH
FACTORY BOLTS)
➡
CAB
➡
CAB