Assembly Instructions

DECKED. COM | #DECKEDUSA | @DECKEDUSA DF4 | v.4 | Page 9

INSTALL: DRIVER’S SIDE DECK HALF

• Use 1 1/2” bolt to bolt deck, cabside ammo can and bracket together by aligning bracket with the cabside lip of

ammo can; BAG CS AMMO CANS. Use screwdriver to align grab nuts on bracket. You will have 4 extra nuts.

• Insert the J-hook through the tailgate hole on the driver side tailgate ammo can and loop J-hook through tie down

or mounting bracket in bed. Assemble with black spherical washer, flat washer and nut; BAG J7. Don’t tighten yet.

MAKE SURE THE CENTER VERT IS IN THE CENTER OF YOUR BED; the gaps on either sidewall may not be equal

because the world isn’t perfect and neither is your truck bed.

• Alternately and gradually tighten all J-hooks to ensure DECKED is centered and secure. Do not tighten one side of

J-hooks all the way in one step. DO NOT OVERTIGHTEN J-HOOKS!

NOTE: If the DECKED system is noticeably “crowned”, the J-hooks are too tight.

• Install the window covers in the cabside ammo cans (from inside the ammo can).

DRIVER SIDE

CABSIDE AMMO CAN

DRIVER SIDE

TAILGATE AMMO CAN

ORDER OF J-HOOK

ATTACHMENT PARTS

➡

CAB

BRACKET BOLTS

(RED)

CS AMMO CANS

➡

CAB