Assembly Instructions

DECKED. COM | #DECKEDUSA | @DECKEDUSA DF4 | v.4 | Page 7

ASSEMBLY: PASSENGER’S SIDE DECK

(NOW YOU’RE ACTUALLY GETTING SOMEWHERE!)

• Place C-channel on the inside ledges of a cabside ammo can and a tailgate ammo can.

• The end of the C-channel with the endplate must rest on the cabside ammo can.

• You should have the correct tailgate ammo can for this step. The axle will be on the tailgate side of the system.

If not, swap the tailgate ammo cans now.

• Loosely bolt C-channel to the two ammo cans. Make sure the bolt head is on the C-channel side, not inside the

ammo can; BAG CCHANNEL HW. Don’t tighten yet.

• Line up the passenger’s side deck (sticker on end of deck panel indicates RIGHT/PASSENGER) on top of the

C-channel/ammo can assembly.

• Bolt the deck to the ammo cans; BAG B1 for the tailgate ammo can, BAG CS AMMO CAN for the cabside ammo can,

but do not install any bolts in the two holes along the cabside edge of the ammo can–leave these empty for now

(see INSTALL page 8, for reference).

• Now go back and tighten the loose bolts connecting the ammo cans to the C-channel.

• Grab your buddy to help you lift the assembly into the passenger side of the truck bed.

TAILGATE AMMO CAN AXLECABSIDE AMMO CANCCHANNEL ENDPLATE

CS AMMO CANS

CCHANNEL HW

PASSENGER SIDE DECK HALF

CAB

➡