Manualshelf

Installation Guide

ManualsBrandsDECKED ManualsTool StoragePick-Up Truck Storage System for Ford F150 (2004 - 2014), 5 ft. 6 in. Bed Length
12345678910
PREPARE BED: BRACKET INSTALLATION
• Remove cabside factory tie-downs on both sides of truck bed (T30 Torx driver required). Make sure
to SAVE THE FACTORY FORD BOLTS, as you will need them for the DECKED brackets.
• Install DECKED tie-down brackets and U-nuts on both sides of truck using bolts from step above; bag 3A.
Note: Brackets are marked left (driver side) and right (passenger side).
3A
SAVE THESE BOLTS
FACTORY FORD F150
TIEDOWN BRACKET
DECKED
TIEDOWN BRACKET
REUSE BOLTS HERE
U-NUT