SDS

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. REPORT NO.: LCS1400315379TS
Material Safety Data Sheet
Page 3 of 8
of hazardous materials leakage.
Environment hazards:
Ingredients contained or their ingredients products could be harmful to environment.
Burn & Burst danger: If heated strongly by the surrounding fire, acrid gas and flammable gas may be
emitted and may case explode dangerous.
Section 4- First Aid Measures
The cell is not hazard with eye and skin contact under normal circumstance. In case of the enclosure is
damaged, the cell can not be used and touched. It is safety except that the cell is damaged by fire or rupture.
The leakage of internal hazardous substance and formation of hazardous substance would occur, take the
following measures if contact with the cell.
Skin touch: If there is any unwell reaction, wash thoroughly with soap & water, flush with plenty of water. If
irritation persists, seek medical advice.
Eyes touch:
Rinse immediately with plenty of water for at least 15 mins. Contact a doctor if symptoms
persist.
Inhalation:
Remove from exposure site to fresh air. Keep at rest. Obtain medical attention.
Ingestion: Rinse mouth out with water. Seek medical advice immediately.
Section 5- Fire Fighting Measures
Danger characteristic: Meet high fever, flame, there may cause explode danger
Extinguishing Media: Use dry graphite, sandy soil as appropriate for materials in surrounding fire.
Fire-Fighting: The staff must wear the clothes which can deference the fire and toxic gas. Put out the fire in
the upwind direction. Avoid using direct streams of water or foam on molten burning
material as it may scatter and spread the fire.
Recommended: N/A
Special measures:
N/A
Extinguishing procedures: N/A
Section 6- Accidental Release Measures
Personal precautions: If the cell is released, remove personnel from area until fumes dissipate. Provide
maximum ventilation to clear out hazardous gases. The preferred response is to